Trade Distributors of
Professional Sound & Lighting
 

Decorative LED Products

Visage LED Balls & Cubes

These products are formed from white polypropylene, and are IP66 rated, which means that the units can be used outdoors. The bright decorative effect produced has endless applications including nightclubs, bars, exhibitions, shop displays, marquees, gardens, stage sets - the only limit is your imagination!

They must be powered by the dedicated SRC-241 controller. The SRC-241 will control up to 12 ball/cube products. The user can either use the SRC-241’s built in programs, or connect a standard DMX controller to have full DMX control over all 12 balls/cubes.

Dimensions 300mm side/diameter
Weight 4Kg
Input Power 24v DC (Via SRC-141 Controller)
LEDs 81
Control SRC-141 Controller
Visage LED Pipe 24v

These linear strips of LEDs are perfect for highlighting architectural features and stage sets. They are extremely compact, which allows them to be easily concealed, and the minimal operating temperature makes them ideal for use in enclosed spaces such as internal lighting for signage.

They contain Red, Green & Blue LEDs to allow full RGB colour mixing.

For optimum results, you should ensure that the surface to be illuminated has a matt finish - it is a common misconception that reflective surfaces will illuminate best.

The LED Pipes are both powered and controlled via the SRC-171.

The controller features two 24vdc outputs, but units connected to the SRC-171 will all be the same colour at the same time regardless of which output they are connected to. Units are wired in parallel using 4 core cable.

If you require control of the colour of individual tubes, see the DMX LED Pipe below.

The controller can be used stand-alone to set a fixed colour, roll through all colours at a variable speed, and strobe all units at a variable speed. By connecting a DMX controller, these features can be controlled remotely.

  300 1000
Dimensions 343 x 30 x 38mm 1010 x 30 x 38mm
Weight 0.2Kg 0.35Kg
Operating Voltage 24vdc, 4.08w 24vdc, 11.28w
LEDs 45 135
Max Tubes on SRC-171 60 pieces 20 pieces

 

Visage LED Pipe 240v

The popular LED Pipe is now available in a 240v version. The operating principles are the same as with the 24v version, however the 240v pipes come in 600mm and 1000mm lengths and are powered and controlled via the SRC-181. Considerably more 240v units can be run from on controller - please see the table below.

  600 1000

SRC-181 Controller
Dimensions 660 x 30 x 46mm 1000 x 30 x 38mm
Weight 0.3Kg 0.38Kg
Operating Voltage 240vac 240vac
LEDs 90 135
Max Tubes on SRC-181 150 pieces 100 pieces

 

Visage DMX LED Pipe

The LED Pipe DMX is a refinement of our popular standard LED Pipes. These Pipes can be individually addressed, and given a direct DMX feed allowing much more control and flexibility than the standard version.

They are powered by the SDL-109P drive unit which provides power for up to 20 DMX Pipes, after which additional SDL-109P units must be used to power further multiples of up to 20 pipes.

The LED Pipe DMX is ideal for use in retail, exhibition, stage, and much more.

 
Dimensions 300mm length x 28mm Pipe Diameter
Beam Angle 100° x 40°
LEDs 45 (15 x Red, 15 x Green, 15 x Blue)
Power Supply SDL-109P (powers up to 20 tubes)
Control Signal DMX512

 

Visage LED Path Light

The LED Path Light is designed for outdoor use and is IP65 rated.

Path lights must be controlled by the SRC-171 unit detailed above. Up to 50 Path Lights can be driven from one controller.


 

Visage LED Back Light String

The LED Back Light Strings are perfect for illuminating signage and highlighting architectural features and stage sets. They are extremely compact, which allows them to be easily concealed, and the minimal operating temperature makes them ideal for use in enclosed spaces such as internal lighting for signage.

They are IP68 rated, so suited to both indoor and outdoor use.

The string is supplied with 20 LED modules and can easily be cut and joined as required. The maximum number of backlight modules in a continous string is 80 pieces.

The strings are driven by a power supply (LED042) which can be loaded up to 1600mA - this means you could connect 80 red or yellow modules (as they draw 20mA each), or 40 green, blue or white modules (as these draw 40mA each).

Each string has an overall length of 2 metres.

Specification (each Module)
Dimensions 40x16x10mm
LEDs 4
Voltage 12v
Current Red/Yellow: 20mA
Green/Blue/White: 40mA

 


Animated Decorative LED Products

These effects are designed as visual ‘eye candy’ rather than for illumination. Both effects are based on the same principal, where colours ‘flow’ across the panel/tube. They are controlled by dedicated controllers which are pre-programmed with 10 animated effects, and 7 selectable fixed colours. Each of the animated effects has variable parameters such as speed, strobe and in the case of two-colour effects, the colour combination can be specified. These patterns can be controlled remotely by DMX.

Both of these products really have to be seen in action to understand the effect produced.

Visage LED Motion Panes

These are based on the dimensions of a standard 600mm ceiling tile. They feature mounting slots and eyelets on the rear for flexible mounting/flying.

The Panes are powered and controlled by the SDL-109C1, which will operate up to 15 panels before a booster unit is required to power another 15 panels. By using this system of boosters, a total of 500 panels can be controlled together.

Colours flow across the panels in a diagonal direction from corner to corner. Certain sequences on the SDL-109C1 controller allow solid colour changes instead of the flowing effect, including stepping and gentle crossfading effects.
Dimensions 600mm x 600mm x 152mm
Weight

6.6kg
Input Power 12v DC (Via SDL-109C1 Controller)
LEDs 288
Control SDL-109C1 Controller


Get Flash to see the movie which should be here.
Visage LED Motion Tubes 12v

These polycarbonate tubes are Ip64 rated which allows them to be used both outdoors and indoors.

The controller can control up to 8 tubes, with signal booster units allowing further tubes to be added at up to 8 per booster, with a maximum of 4000 tubes being controllable from one SDL-109C controller. The tubes operate at a safe low voltage.

They are supplied with mounting plates which allow straightforward installation.

The uses of this decorative effect are limited only by your imagination - obvious applications include theme parks, nightclubs, and architectural use.
Dimensions 1000mm x 50mm x 75mm
Weight 1kg
Input Power 12v DC (Via SRC-109C Controller)
LEDs 144
Control SRC-109C Controller


Get Flash to see the movie which should be here.
Visage LED Motion Tubes 240v

LED Motion Tubes are also now available in a 240v version, controlled via the SDL-109C1v5 controller.

Dimensions 1000mm x 50mm x 95mm
Weight 1.5kg
Input Power 240v AC
LEDs 144
Control SDL-109C1v5

Up to 1,000 units can be run from one controller, with signal booster (SDL-109A) and additional power supply required every 60 units.

 

Downloads

Images are supplied inside 'ZIP' files. Windows XP will open ZIP files the same as any other folder on your PC. If you don't have Windows XP, you can download a free trial of Winzip from www.winzip.com which will allow you to open ZIP files and save the JPEG images onto your PC.
© Batmink Ltd // All prices and information is correct at time of publishing and is subject to amendment without notice at any time. E.+ O.E.