• HOME
• ABOUT US
• CONTACT US
• TRADE AREA
• DOWNLOADS
• HIRE
• Ts & Cs

• LIGHTING
• SOUND
• VIDEO
• EFFECTS
• HARDWARE
• STAGING
• RETAIL PRICE LIST A-Z

Visage LED Neon Flex

At long last, the effect of neon has been reproduced using LEDs, removing all of the drawbacks of traditional glass gas-filled neon. LED Neon Flex is available in either Standard 24v or Professional 240v versions.

Power Consumption
While traditional neon consumes up to 29.17 watts per linear metre running at 15,000 volts, Standard LED Neon Flex consumes just 8.66 watts per linear metre operating on a 24 volt supply; or between 3.15 and 3.94 watts per metre in the Professional 240v model. This obviously represents considerable savings on the normally high running costs of conventional glass Neon.

Construction
Traditional neon is made from fragile glass, resulting in huge shipping costs, and a high likelihood of damage. LED Neon Flex is constructed from flexible, durable, lightweight PVC. LEDs are encapsulated in a unique oval shaped jacket which has been designed to illuminate uniformly. LED Neon Flex is supplied on drums which can be easily transported.

Shaping
Glass neon can only be shaped by highly skilled glassblowers who heat the glass until it is white hot before forming it. In contrast, LED Neon Flex can be formed by anyone without any special tools or training. It can be bent into tight curves as small as 4cm radius, and can be cut at regular intervals.

Applications
As well as the usual applications of neon, the portability of LED Neon Flex makes it an option for new markets such as touring stage shows and concerts.

Installation
Standard LED Neon Flex must be powered using a dedicated transformer, available separately. Each transformer will power a roll (9.14 metres) of Neon Flex. The Neon Flex can then be shaped and joined using a variety of accessories which are detailed below. Professional LED Neon Flex does not require the use of a transformer and can be connected to a 240v supply using the dedicated front power lead (170cm), available separately.

What are the benefits of the professional version?
With Pro LED Neon flex, there is no need for a transformer, the power consumption is lower, and the maximum length of a continuous length of LED Neon Flex increases significantly.

Visage RGB LED Neon Flex

The new RGB version of our popular LED Neon Flex has all the advantages of the standard flex with the addition of being able to change colours. The flex is controlled via a dedicated controller which enables the user to produce 7 different colours, changing effects and the outputs of the RGB can be varied to produce various colours.

Installation

The installation of the product is very easy by using the range of accessories available including channels, corners and mid connectors - see below.

RGB Neon Flex must be powered using the dedicated SRC-181 Controller which will power up to 120 metres of flex using either the built in patterns or via remote DMX control.

The tubing can be cut at 0.91metre (3ft) lengths and several pieces can be linked together.

Visage Crystal Neon Flex

Standard Neon Flex and RGB Neon Flex are are now available in a new Crystal version, which features a transparent casing and highly reflective backing, giving optimum light output. From a distance of 40m, the hotspots are no longer visible. This product is ideal for "behind pelmet" downlighting.

Visage Neon Flex Accessories

The following range of accessories gives you the flexibility to configure LED Neon Flex to suit your application.

When ordering, please note that each item is available in two versions - one for the single colour standard and professional LED Neon Flex system, and a larger version for the RGB LED Neon Flex - product codes are shown for each.

	RGB Neon Flex Controller SRC-181 Powers up to 120 metres of flex, and features a selection of built-in colour changing, flashing, and static settings. The controller also allows full remote DMX control of the attached Neon Flex.
	Neon Flex Transformer This is used to power the Neon Flex. One transformer will power up to one roll of neon flex (9.14m). LED 064
	Male Connector & Heat Shrink (LN-FX-CA-1 + LN-FX-CA-2) This component is used to connect the Transformer to the Neon Flex, and to fit the L,T and X pieces, it has a jagged edge on one side and a smooth edge on the other. The Jagged edge fits into the flex and the smooth edge fits the Transformer lead or other connector. The Heat shrink is then used to seal the unit especially if being used outdoors. LED060 - To fit Single Colour Version LED071 - To fit RGB Version
	Front Power Lead for 240v Professional Neon Flex This lead provides power to the 240 volt Professional Neon Flex products, and is terminated in a 13 Amp plug. LED 051
	Splice able Connector & Heat Shrink (LN-FX-CA-3) This component is used to join two pieces of flex together. It has jagged points at both ends. LED061 - To fit Single Colour Version LED073 - To fit RGB Version
	Front Power Lead for RGB Neon Flex This lead connects the RGB flex to the controller. (Please note this is not required for the single colour flex) LED070
	Mid Connection lead This is a 1.5 metre lead enabling the user to join two pieces of Neon Flex together, you will require two Male connectors (LED060 or LED061A) to link the Connector to the Flex. LED065 - To fit Single Colour Version LED072 - To fit RGB Version
	End Cap (LN-FX-CA-4) This is used to seal the end of the Neon Flex and must be used to secure the flex and avoid any electric shorts. LED062 - To fit Single Colour Version LED074 - To fit RGB Version
			LED066- X Connector (LN-FX-X) LED067- T Connector (LN-FX-T) LED068- L Connector (LN-FX-L) Use male connectors (LED060 or LED061A) to make contacts (supplied separately). These connectors are not available for the RGB Neon Flex.

Mounting Clip c/w Screws
The unit is a 40mm length of channel which can be screwed to a wall and then the Neon Flex will fit into the channel. The unit comes complete with two fixing screws and is ideal for the user to design bends and curves.
LED063 - To fit Single Colour Version
LED077 - To fit RGB Version

Channeling
This is used to create straight lines of Neon Flex. The channel can be fixed to a wall and the flex then fits into the channel.
LED069 - 1.8m length to fit Single Colour Version
LED076 - 1m length to fit RGB Version
LED076A - 2m length to fit RGB Version

Downloads

Pricelist

Images are supplied inside 'ZIP' files. Windows XP will open ZIP files the same as any other folder on your PC. If you don't have Windows XP, you can download a free trial of Winzip from www.winzip.com which will allow you to open ZIP files and save the JPEG images onto your PC.