Trade Distributors of
Professional Sound & Lighting

 

Lighting Controllers

InStyle DMX Wall-Mount LED Controller

The InStyle controller is an ideal control solution for Architectural LED installations.

The 2-gang panel is fabricated from Stainless Steel, and has just three controls for ultimate simplicity.

The unit features 12 modes of operation which will cover the requirements of most installations - these are detailed below.

At the time of writing, the controller is only capable of controlling our LED DMX Pipe & Wall Washers, but a software update is in development to allow remote control of our standard LED pipe controller, ARC LED 1w & 3w driver boxes and decorative ball/cube controller - please phone/email for availability.

Visage Club 12J DMX

  • 192 DMX Channels
  • 12 Scanners of 16 Channels each
  • 30 banks of 8 programmable scenes
  • 6 programmable chases of 240 scenes each
  • 8 sliders for manual control of channels
  • Assignable joystick for ease of movement
  • File dump allows data to be sent or received between two units
  • Auto mode program controlled by speed and fade time sliders
  • Fade time / assign fade time
  • 8 channel or 16 channel mode
  • Fine adjustment for joystick pan and tilt
  • Blackout master button
  • Manual override button allows you to grab any fixture on the fly
  • Built in microphone for music triggering
  • MIDI control over banks, chases and blackout
  • Power failure memory
  • Fog machine connector
  • DMX in/out: 3 pin XLR. DMX polarity selectable
  • Dimensions: 516 x 160 x 90mm
  • Weight: 2.7Kg

Visage Stage Desk 48 DMX

  • 48 control channels
  • 96 chaser programs
  • 3 digit display
  • MIDI in/out/thru
  • Audio input via built in mic or line input
  • DMX polarity selector
  • DMX out: 3 pin XLR
  • Dimensions: 744 x 294 x 90mm
  • Weight: 7.5Kg

Visage Stage Desk 24 DMX

  • 24 control channels
  • 4 pages of program memory - holds up to 48 programs
  • 3 digit display
  • MIDI in/out/thru
  • Audio input via built in mic or line input
  • DMX polarity selector
  • DMX out: 3 pin XLR
  • Dimensions: 485 x 265 x 90mm
  • Weight: 2.1Kg

Liteputer CX-403 DMX Desk

  • 4 individual channel sliders
  • Master fader
  • Individual channel flash buttons
  • Channel chase
  • Scene chase
  • Audio input

Liteputer CX-603 DMX Desk

  • 6 individual channel sliders
  • Master fader
  • Individual channel flash buttons
  • Channel chase
  • Scene chase
  • Audio input

Liteputer CX-803 DMX Desk

  • 8 individual channel sliders
  • Master fader
  • Individual channel flash buttons
  • Channel chase
  • Scene chase
  • Audio input

Liteputer CX-1203 DMX Desk

  • 12 individual channel sliders
  • Master fader
  • Individual channel flash buttons
  • Channel chase
  • Scene chase
  • Audio input

Dimmers

Liteputer DX-401A Truss-mount DMX Dimmer

  • 4 channels of 10 Amps, max total load 30Amps
  • 2 x 15A power input
  • Self-testing function
  • Pre-heat function to protect lamps
  • DMX signal connection: 3 pin XLR

Liteputer DX-402A Truss-mount DMX Dimmer with local control

  • 4 channels of 10 Amps, max total load 30Amps
  • 2 x 15A power input
  • Self-testing function
  • Pre-heat function to protect lamps
  • DMX signal connection: 3 pin XLR
  • Local control sliders

Liteputer DX-610 DMX Dimmer

  • 6 channels of 10 Amps protected by individual MCBs
  • Channels can be individually set as switching or dimming
  • Self-testing function
  • Thermostatically controlled fan
  • Pre-heat function to protect lamps
  • DMX signal connection: 5 pin XLR and 3 pin XLR
  • 0-10v signal connection: D-type plug (15 pin female)
  • 19” 2U rack mountable

Liteputer DX-626 DMX Dimmer

  • 6 channels of 20 Amps protected by individual MCBs
  • Channels can be individually set as switching or dimming
  • Self-testing function
  • Thermostatically controlled fan
  • Pre-heat function to protect lamps
  • DMX signal connection: 5 pin XLR and 3 pin XLR
  • 0-10v signal connection: D-type plug (15 pin female)
  • 19” 2U rack mountable

Liteputer DX-1210 DMX Dimmer

  • 12 channels of 10 Amps protected by individual MCBs
  • Channels can be individually set as switching or dimming
  • Self-testing function
  • Pre-heat function to protect lamps
  • DMX signal connection: 5 pin XLR and 3 pin XLR
  • 0-10v signal connection: D-type plug (15 pin female)
  • 19” 4U rack mountable

Visage Dimmer 4 DMX

  • 4 Channel DMX Dimmer Pack
  • Twin IEC outputs on each channel
  • Max 10A per channel
  • Max total load 20A
  • Stand-alone chase feature
  • Truss mounting
  • Dimensions: 260 x 190 x 75mm
  • Weight: 2.7Kg

Visage Dimmer 6 DMX

  • 6 channel dimmer pack with DMX and analogue inputs
  • 3 phase inputs
  • LED indicators for each channel
  • Individual channel faders
  • Max 10A per channel
  • Dimensions 482 x 381 x 89mm
  • Weight 8kg

DMX Splitter/Buffers

Liteputer DP-81 DMX Splitter/Buffer

  • DMX Splitter/Buffer
  • 1 input, 8 opto-isolated outputs
  • 19” 1U Rack Mountable
  • Available in 3 pin and 5 pin versions (please specify when ordering)

Visage SRC-143 DMX Splitter/Buffer

  • DMX Splitter/Buffer
  • 3 pin and 5 pin inputs, with link-through output
  • 4 twin opto-isolated outputs
  • Output status indicators
  • Each output has a 3 pin and 5 pin socket

 

Downloads

Images are supplied inside 'ZIP' files. Windows XP will open ZIP files the same as any other folder on your PC. If you don't have Windows XP, you can download a free trial of Winzip from www.winzip.com which will allow you to open ZIP files and save the JPEG images onto your PC.

 

© Batmink Ltd // All prices and information is correct at time of publishing and is subject to amendment without notice at any time. E.+ O.E.